How to Remove and Reuse Thermal Labels Without Damaging Your Products

How to Remove and Reuse Thermal Labels Without Damaging Your Products

Thermal labels are industry-wide staples that provide convenience, efficiency and cost-effectiveness for the labelling process.

However, in some cases, these labels need to be removed and reused without damaging the objects on which they are written. Whether you're repurposing materials, repurposing packaging, or reusing packaging, it's important to know how to remove and reuse thermal paper.

In this comprehensive guide, we'll explore best practices for safely removing and reusing thermal label to protect and extend the life of your products.

What are thermal labels?

Before moving on to the removal process, it is important to understand the basics of thermal paper. Thermal paper has two layers: the face, the visible layer where the printed paper resides, and the adhesive that forms the label on the surface. Thermal labels are designed to be durable on most surfaces; This makes them ideal for labelling products, packaging and packaging.

How to remove thermal label safely

When removing thermal label, care should be taken not to damage the label. Here are some steps to safely remove thermal paper:

  1. Use your fingers or a plastic scraper to gently remove the corner of the label. Do not use sharp tools or excessive force as this will damage the surface.
  2. Gently peel the paper away from the surface; Please keep it solid even if it is high. If the sticker is durable, use heat from a hair dryer or heat gun to soften the adhesive.
  3. Use residue or glue remover to dissolve any remaining glue on the surface. Use the remover with a soft cloth or sponge and gently scrub the adhesive until it loosens.
  4. When the glue melts, wipe the face with a wet cloth to remove residue. Allow the surface to dry completely before applying new paper or equipment.

Reusing thermal label

After removing the thermal label, you may want to reuse it to fill or repackage other products. Here's how to reuse thermal paper correctly;

  1. Carefully remove the label from the surface, not tearing or damaging it. If the label is still in good condition, you can reuse it in other applications.
  2. If residue or adhesive has accumulated on the label, clean the label thoroughly with soap and water or a mild adhesive remover. Gently scrub the paper with a brush or sponge to remove any dirt or debris.
  3. Allow the label to dry completely before replacing it in its new location. To increase adhesion, ensure the surface is clean and free of dirt or debris.
  4. Press the label firmly to the new surface to remove any bubbles or wrinkles. Apply even pressure to ensure the paper is secure.

To complete the thermal label removal and reuse certification, consider the following instructions:

- Test the lift on a small, invisible area before working on a larger area.

- Use heat to soften the adhesive and make it easier to remove, but do not use too much heat to avoid damaging the surface.

- Select a small amount of adhesive or solvent to dissolve the remaining adhesive without damaging the surface.

- Before reusing the removed paper, store it in a clean, dry place to prevent damage or contamination.

Final Thoughts

With proper care and maintenance, removing and reusing thermal label can be a simple process that protects your property and reduces waste. You can remove and reuse thermal label without compromising the integrity of your products by following the steps specified in this guide and being careful not to damage them. As your trusted supplier of quality thermal labels, 4x6Labels is here to support your labeling needs, providing expert advice, quality products and exceptional service.

Back to blog